Pressure Switches
| A wide range of pressure switches can be supplied from low cost differential switches to quality electronic switches. Three examples are given below - call or e-mail to discuss. | ||
|
IFM PK6523 Electronic pressure monitor with two switching outputs - normally open/closed complementary. When pressure increases OUT1 closes and OUT2 opens when the upper set value is reached. When pressure decreases OUT1 opens and OUT2 closes.
Setting is simple - by rotating two setting rings (a locking ring is provided). A green LED indicates electric supply is OK, a yellow LED indicates set value is reached.
Stainless Steel wetted parts and Viton seals.
Measuring range 0 to 25 bar, other available ranges 0 to 10 bar, higher pressures available for other applications.
|
 |
£ TBA |
|
IFM PN5004 Electronic Pressure Monitor with display and one switching output. Used for example to cut out a pump on overpressure. Minus 1 to 10 bar with G1/4" process connection. Other available ranges for typical pumping applications are 0 to 1.0, 0 to 2.5, 0 to 25 bar. Higher pressures are available for other applications. |
 |
£ TBA |
|
IFM PI2794 series full metal minus 1 to 10 bar pressure sensors for hygienic applications - high grade stainless steel housing high temperature operation (to 125 deg C so suitable for CIP). Four sealing options G1" process connection and clamp or pipe fittings to suit your system. Visual digital display of pressure with programmable switching output for use as a pressure switch. Intuitive set up. Other available ranges -1 to 1, -1 to 4, -1 to 25, -0.124 to 2.5, -0.124 to 0.25 and -0.005 to 0.1 bar. |
 |
£ TBA |