Keller ECO1 is a compact and economical digital pressure gauge which measures from minus 1 to 30 bar (abs) with an accuracy of 0.5% typically, 1% maximum. A 0-300 bar gauge is available.  The gauge is battery powered.  Battery life is approximately 1000 hours in measurement mode.  The unit has an auto shut off for maximum battery life.

The benefit of the ECO1 is that a single gauge will cover most applications in the range 0-50 degrees C and so can be used for taking measurements on different installations.

The ECO 1's dual display updates twice every second, showing the measured value and the minimum or maximum value attained. As a special feature, the ECO 1 has a Zero Tare feature which allows the user to set the zero at any pressure

Also available from Keller are high accuracy and data logging gauges.  E-mail for details

Keller ECO1 Gauge -1 to 30 or 0 to 300 Bar abs.  Stainless steel wetted parts and IP65 protection, supplied with G1/4" swivel pressure connection with Eolastic^TM o-rings.  The optional rubber cover allows the gauge to be used outdoors in all conditions.

Manufacturers leaflet                            Manufacturers Manual

£ 145.00

Keller ECO1 Gauge -1 to 30 or 0 to 300 Bar abs

Generally as above, but for use in Hazardous area, intrinsically safe and Atex approved.

Classification: II 1 G EEx ia IIC T6 or T5

Manufacturers Manual

£ 178.00

Protective rubber cover for ECO1 gauge (not Atex approved)

£   15.00

IFM PG2794 minus 1 to 10 bar Combined electronic and analogue pressure gauge with switch for hygienic applications.  Output functions (eg pump on, pump off) programmable via LED display and optical touch.  Suitable for CIP, FDA and EHEDG certified.

Other ranges available -1 to 1, -1 to 4, -1 to 25, -0.124 to 2.5, -0.124 to 0.25 and -0.005 to 0.1 bar.

Manufacturers datasheet

£ TBA

IFM PN5004 minus 1 to 10 bar (other ranges available) Pressure monitor with display. G1/4" connector, single switching output (typically used to protect against overpressure).  Stainless steel construction suitable for temperature range minus 25 to +80 deg C.

Manufacturers datasheet

£ TBA

IFM PN7004 minus 1 to 10 bar (other ranges available) Pressure monitor with display. G1/4" connector, two switching outputs (typically used for stop/start pump on demand).  Stainless steel construction suitable for temperature range minus 25 to +80 deg C.

Manufacturers datasheet

£ TBA

Prices exclude VAT and carriage